Improvement in nanocomposite host (nanocavity of dealuminated zeolite Y)-guest (12-molybdophosphoric acid) catalytic activity and its application to the one-pot three-component synthesis of tetrahydrobenzo[b]pyrans

Zeolite Y was dealuminated by chemical methods (with ethylenediaminetetraacetic acid) to modify the zeolite structure for 12-molybdophosphoric acid (MPA) loading. MPA was encapsulated in the nanocavities of modified dealuminated zeolite Y (MDAZY) and characterized by Fourier transform infrared, X-ray diffraction, and atomic absorption spectroscopy. The new catalyst was applied for an efficient chemoselective synthesis of tetrahydrobenzo[b]pyran derivatives, and the corresponding products were obtained in good to excellent yields in very short reaction times. Furthermore, the catalytic activity of this new catalyst in the synthesis of tetrahydrobenzo[b]pyrans was compared with MPA encapsulated in zeolite Y dealuminated by the hydrothermal method. The catalyst (MPA–MDAZY) was recovered and reused several times without loss of its catalytic activity.     

FeOx Coating on Pd/C Catalyst by Atomic Layer Deposition Enhances the Catalytic Activity in Dehydrogenation of Formic Acid

Hydrogen generation from formic acid (FA) has received significant attention.The challenge is to obtain a highly active catalyst under mild conditions for practical applications.Here atomic layer deposition (ALD) of FeO_x was performed to deposit an ultrathin oxide coating layer to a Pd/C catalyst,therein the FeO_x coverage was precisely controlled by ALD cycles.Transmission electron microscopy and powder X-ray diffraction measurements suggest that the FeO_x coating layer improved the thermal stability of Pd nanoparticles (NPs).X-ray photoelectron spectroscopy measurement showed that deposition of FeO_x on the Pd NPs caused a positive shift of Pd3d binding energy.In the FA dehydrogenation reaction,the ultrathin FeO_x layer on the Pd/C could considerably improve the catalytic activity,and Pd/C coated with 8 cycles of FeO_x showed an optimized activity with turnover frequency being about 2 times higher than the uncoated one.The improved activities were in a volcanoshape as a function of the number of FeO_x ALD cycles,indicating the coverage of FeO_x is critical for the optimized activity.In summary,simultaneous improvements of activity and thermal stability of Pd/C catalyst by ultra-thin FeO_x overlayer suggest to be an effective way to design active catalysts for the FA dehydrogenation reaction.     

Formation of active phases of Fe/C,Cr/C and Fe–Cr/C catalysts in oxidative dehydrogenation of ethane

The oxidative dehydrogenation of ethane into ethylene using CO₂ as an oxidant at temperatures of 650–750 °C was carried out over Fe/C, Cr/C and Fe–Cr/C catalysts deposited on a carbon support. Before and after the reaction the catalysts were investigated by X-ray powder diffraction (XRD), in situ magnetometry and transmission electron microscopy methods. The correlation between activity of Fe/C, Cr/C and Fe–Cr/C catalytic systems and their phase composition was established.     

金属催化剂光热催化CO2还原的研究进展

CO2的过量排放导致温室效应对环境的影响越来越严重,通过电催化、光催化、热催化、光热催化或光电催化将CO2还原成高附加值的化学品是解决CO2排放的有效途径.其中, CO2的光热催化转化是当前的主要研究领域之一.我们对光热催化进行了总结分类:热助光、光助热、光驱热和光热协同催化,并详细介绍相应的催化机理,总结了金属催化剂用于光热催化CO2还原的最新研究进展,最后提出了光热催化面临的挑战与展望.     

原子层沉积构筑Pd/TiO2限域催化剂及其在1,4-丁炔二醇加氢的应用

利用ALD制备了TiO₂限域的Pd催化剂, 研究了限域空间内Pd纳米颗粒与TiO₂的界面作用对1,4-丁炔二醇(BYD)加氢性能的影响. 相比于管外负载型催化剂, 限域催化剂在催化1,4-丁炔二醇选择性加氢反应中体现出非常高的催化活性和1,4-丁烯二醇的选择性. HR-TEM、 EDX-Mapping、 XRD、 XPS和H₂-TPR表征说明, 限域体系中Pd-TiO₂的界面相互作用强于传统TiO₂表面负载型Pd催化剂, 这种强界面作用不仅能够提高BYD的加氢活性, 也可抑制半加氢产物1,4-丁烯二醇的异构化和深度加氢, 提高1,4-丁烯二醇的选择性, 而且限域结构也可阻止管内壁Pd纳米颗粒的脱落, 提高催化剂的稳定性.     

不同聚合物分散剂对Pt/SAPO-11催化剂性能的影响

采用浸渍法制备了经过不同聚合物分散剂处理的Pt/SAPO-11催化剂,并通过X射线衍射(XRD)、透射电子显微镜(TEM)、N₂吸附-脱附和NH₃程序升温脱附(TPD)等对催化剂的组织结构进行了表征。结果表明,分散剂不会破坏催化剂的结构,反而提高了其孔体积、孔径和比表面积,同时改变了沸石的酸强度和酸量,其中以聚乙烯吡咯烷酮处理的Pt/SAPO-11催化剂孔体积、孔径和酸性分布最佳。在固定床反应器上对不同分散剂处理的Pt/SAPO-11催化剂催化性能进行评价,结果表明聚乙烯吡咯烷酮处理的Pt/SAPO-11催化剂也表现出最佳的催化性能,麻风树油的加氢脱氧率高达99.45%,生物航空煤油组分收率和异构烷烃组分(C₈~C₁₆)的选择性分别达到了44.67%和56.37%。     

离子液体修饰对Cu/USY催化乙炔氢氯化反应性能的影响

为了提高Cu/USY催化剂在乙炔氢氯化反应中的催化活性,设计并成功制备了一系列离子液体修饰的分子筛负载的铜基催化剂(Cu@TPPB/USY).当铜和TPPB的百分含量均为15时,在反应温度为160℃,乙炔气体空速为120 h-1,氯化氢与乙炔的摩尔比为1.25:1的条件下,催化剂的乙炔转化率提升了1.17倍,氯乙烯选择性一直保持在98%以上.结合催化剂的傅里叶红外(FT-IR)、 N2物理吸脱附(BET)、热重分析(TG)、 X射线光电子能谱(XPS)、透射电镜(TEM)、 X射线衍射(XRD)、氢气程序升温还原(H2-TPR)和等离子体发射光谱(ICP-OES)的表征,认为TPPB的修饰不仅可以促进催化剂中Cu物种的分散,抑制其还原和流失,还能减少催化剂表面积碳、增强Cu活性物种与载体间的相互作用力,有效地提高Cu/USY催化剂的催化活性.     

Metal Nodes of Metal-Organic Frameworks can Activate Molecular Hydrogen

Hydrogenation of multiple bonds are among the most general and important organic reactions. Typical heterogeneous catalysts are based on transition metal nanoparticles, including noble metals. Data are presented here showing that metal nodes of MIL-101(Cr) and UiO-66 in the absence of occluded metal nanoparticles can promote hydrogenation of polarized X=Y double bonds of nitro and carbonyl groups. The catalytic activity is a function of the composition of the metal node and the organic linker. It is proposed that the reaction mechanism is based on the operation of frustrated Lewis acid/base pairs.     

Metadynamics simulations of R–NHC reductive elimination in intermediate palladium complexes of cross-coupling and Mizoroki–Heck reactions

Exploring the free energy surface of the R–NHC coupling reaction in the key intermediates of the Mizoroki–Heck and cross-coupling catalytic cycles has been conducted by the methods of biased and unbiased molecular dynamics. Molecular dynamics simulations were carried out both in vacuum and in a polar solvent, with the following main observations on the influence of the media: (1) the solvent prevents the dissociation of the solvate ligand, so the R–NHC coupling proceeds in a four-coordination complex (rather than in a three-coordination one, as in the case of a gas-phase reaction); (2) in the condensed phase, the potential barrier of the reaction is significantly higher compared to the same process in vacuum (17.7 vs. 21.8 kcal mol^-1); (3) polar solvent stabilizes the R–NHC coupling product. The reaction in a polar medium is exergonic (ΔG = −3.9 kcal mol^-1), in contrast to the in vacuum modeling, where the process is endergonic (ΔG = 0.4 kcal mol^-1).     

CoMn@NC催化5-羟甲基糠醛常压氧化为2, 5-呋喃二甲酸二甲酯

Dimethyl furan-2, 5-dicarboxylate (DMFDCA) is a valuable biomass-derived chemical that is an ideal alternative to fossil-derived terephthalic acid as a monomer for polymers. The one-step oxidation of 5-hydroxymethylfurfural (HMF) to DMFDCA is of practical significance. It not only shortens the reaction pathway but also avoids the separation process of intermediates; thus, reducing cost. In this work, non-noble bimetallic catalysts supported on N-doped porous carbon (CoMn@NC) were synthesized via a one-step co-pyrolysis procedure using different pyrolysis temperatures and proportions of metal precursors and additives. We employed the prepared CoMn@NC catalysts in the aerobic oxidation of HMF under mild reaction conditions to obtain DMFDCA. High-yield DMFDCA was obtained by screening the prepared catalysts and optimizing the reaction conditions, including the strength and amount of the base, as well as the reaction temperature. The optimized yield of DMFDCA was 85% over the Co₃Mn₂@NC-800 catalyst after 12 h at 50 ℃ using ambient-pressure oxygen. The physicochemical properties of the catalysts were determined using a variety of characterization techniques, the factors affecting the performance of each catalyst were investigated, and the relationship between the physicochemical properties and performance of the prepared catalysts was elucidated. A porous structure with a high surface area had a positive effect on mass transfer efficiency. Cobalt nanoparticles (NPs) and atomically dispersed Mn were coordinated to N-doped carbon to form M―N_x (where M = Co or Mn). Based on the Mott-Schottky effect, there was significant electron transfer between each metal and the N-doped carbon, additionally, the metal NPs supplied electrons to the carbon atoms. The electron-deficient metal site in the pyridinic N-rich carbon was beneficial for the activation of HMF and oxygen. The activation of oxygen produced reactive oxygen species (such as superoxide radical anions) to ensure high selectivity to DMFDCA through dehydrogenative oxidation of the hemiacetal intermediate and hydroxymethyl group of 5-hydroxymethyl-2-methyl-furoate. The existence of disordered and defective carbons increased the number of active sites. Subsequently, we performed a series of control experiments. Based on our current experimental results and previous studies, we propose a simple mechanism for the aerobic oxidation of HMF to DMFDCA. The catalyst was stable, its performance decreased slightly after two cycles, and it was tolerant to SCN⁻ ions and resistant against N or S poisoning. Furthermore, the use of this catalytic system can be expanded to various substituted aromatic alcohols, such as benzyl alcohols with different substituents, furfuryl alcohol, and heterocyclic alcohols. Simultaneously, the product type was further extended from methyl esters to ethyl esters with a high yield when the substrate reacted with ethanol. In conclusion, this catalytic system can be applied in the production of carboxylic esters for polymers.